Hydrastar states that with their actuators like the Hydrastar # HBA16 you would need to use the adapter # HBA-CAM with the integrated brake controller of your 2008 Ford F-250. What's interesting is that for the Ford trucks the adapter is not needed for 2005-2006 models, is needed for 2007-2008, and then isn't needed for any of the newer trucks. view full answer...
Thank you for the info and the picture! I reached out to my contact at Lippert who confirmed that your axle uses a 25580 inner bearing, a 14125A outer bearing, and a 122088 grease seal - all of which can be found in the bearing kit # BK3-200.
This means for your 5th wheel trailer you will need the HydraStar Disc Brake Kit w/ Actuator for Tandem Axle Trailers # HSE7K-T1. The hub and rotors match up with your spindles and this comes with the actuator and hydraulic lines needed to get everything... view full answer...
The Race Ramps Straight Show Cribs for Service and Display # RR-SC are safe enough to work under, but you'll want to be sure to place your transmission in park (or the lowest gear setting) as well as engage your parking brake to help limit any movement.
With that being said, just be sure to use these for light mechanic work light changing out liquids. If you're needing to shift some heavy stuff around and whack something with a hammer then you'll want to take more of a traditional approach... view full answer...
We did have the Black version as part LC62ED but that was unfortunately discontinued so you'll either need to use the White idler assembly with your current black drive assembly or you'll need to swap out both assemblies for a matching White set:
- Idler Assembly # LC62ED
- Drive Assembly # LC22ED view full answer...
I was able to pull up a video of your 2022 Forest River Rogue Vengeance 4007 and in it I saw that your pin box is a Rhino box so the Gen-Y pin box adapter you'd want is the part # GY23GR which fits in place of the Rhino and has a hitch weight range of 3,500 lbs - 5,500 lbs so it would work perfectly for you. view full answer...
The Lippert AP Kit # LC52SV for the Road Armor Shock Absorbing Equalizer # LC696740 does not come with bronze bushings. It is recommended to use Bronze Bushings # K71-291-00 when using a wet bolt as if you have nylon bushings it can deteriorate the bushing. The equalizer will come with bronze bushings already installed. If your leaf springs have damaged bushings or nylon bushing you will need to order the bushings above which includes 4, enough for 2 leaf springs. A tandem axle trailer... view full answer...
Go To Results